Ponies, like pretty much anything, can grow mold and are susceptible to bacteria. Luckily, ponies usually have small indentations on their heads and bodies so you can see how they're supposed to line up. If you want, you can glue the heads back on using a craft glue such as Aleene's Tacky Glue or model glue, but you probably won't need to. If your pony is especially difficult, you can cut a piece out of the neck seam to make it go on more easily. Soften the neck again to replace the head. Be very gentle when pulling on the head, to avoid ripping the vinyl. This helps soften both the vinyl and the glue. Pictured to the right, Sweetlittlejenny recommends a scrapbooking Scoop Tool for a safer version of this.įor really hard headed ponies, apply heat by dipping them in hot water or blowing on the neck seam with a hair dryer. X-Acto knives are very popular for this and the blades can be reversed to help avoid accidentally cutting into the pony's neck or body. Use a thin blunt object to pry off any sections that are still glued to the body. Lots of regular pony heads can be removed by gently tugging and squeezing at them. You'll need to remove your ponies' heads to clean inside them, while boiling them, and for projects like re-hairing. You might also want to give the pony an OxiClean bath. If you also dyed its hair, you’ll likely have to wash it several times to get out all the extra dye. Once your pony has reached your desired color, wash its body to remove any excess dye. Sand off the excess glue, or remove it using acetone (this can also be done before you start the dyeing process, if the glue is visible), then continue with your dye job. Different collectors have different opinions on whether or not to remove the pony’s head.Īfter the pony has been in the dye for a few minutes, check for areas where the color is not changing due to the presence of excess glue. You can also hold the pony down in the water with tongs to help it absorb the dye evenly. You can always put the pony back in the mixture or add more dye, so ere on the safe side and use less at first.Ĭontinuously stir the water as your pony is soaking to keep the dye mixed evenly in the water. You can make the pony darker and/or brighter by letting it soak longer, or by adding more dye to the water.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |